Skip hooking it back up to all the peripherals and quickly add in Wi-Fi support from the command line. My normal further setup steps for RPi 3 are here.ĮDIT : One of the things necessary on later RPi’s is to turn off power saving mode on the WLAN interface.You configured your headless Raspberry Pi just the way you want it, it’s settled in and running smoothly, but suddenly you want to move it away from its Ethernet tether with a Wi-Fi module.

Check your router or ise ‘nmap’ or similar to check the assigned IP: This is necessary to enable SSH access as SSH is by default disabled on more recent versions of Raspbian.īoot the Rpi by powering up and after ~30secs you should be able to connect to the IP assigned. Ensure there are DNS Servers configuredĪdd the following to the new file (or your own nameservers):Ĭreate an ssh empty file in the mounted boot partition. There could be other config values you might need depending on the network you are connecting to. Create a PSK hash using ‘ wpa_passphrase‘ this older article You could use the clear-text PSK passphrase but I prefer not to do that in configuration files. Vim etc/wpa_supplicant/wpa_nfĬheck the file and ensure the network settings are as per the Wireless Network you are connecting to.Ĭtrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev

Wpa-conf /etc/wpa_supplicant/wpa_nf Set up connection details for local wireless network Set up network interfacesĬreate a new config file for the wireless interface.Īdd the following to the new file (if you want to use DHCP – change to static if you want to fix the IP): ' Raspberry Pi Zero W' ( CC BY-SA 2.0) by lespounder Download Raspbian Liteĭd bs=4M if=-raspbian-stretch-lite.img of=/dev/sdbĪfter this step there should be 2 additional mounts (if not mount the 2 SD card partitions manually).

Raspberry pi zero w wireless setup